鉆探抽沙船廠家- 冠誠重工- 開山集團-青州冠誠重工機械有限公司
香港開山集團國際貿易有限公司 [開山集團]
Kaishan (HK) Group lnternational Trade Co., Limited
山東省開山重工機械有限公司 [開山集團]
Shandong Kaishan Heavy Machinery Co., Ltd
青州冠誠重工機械有限公司 [開山集團]
QING ZHOU GUANCHENG HEAVY INDUSTRIAL MACHINERY CO.,LTD
冠誠鉆探抽沙船：
鉆探式抽沙船主要用于大水域作業或車輛，挖沙船不能進入使用的沙場或水庫，江河湖泊，其工作原理是用鉆頭穿過泥層，利用高壓水泵產生壓力水，通過高壓水槍沖擊泥沙，將沉積的泥沙沖擊形成漂浮狀態。然后將泥沙通過抽沙泵抽取再用管道輸送至目的地。該船設計新穎，操作簡便，效率高，適用于河道疏浚、湖泊水庫清淤、圍海造田、港口碼頭清理、抽黃砂，建筑沙等。抽沙船一般分為10-80方，抽沙泵可以采用6寸-12寸，掛槳機可從18馬力到80馬力。想提高抽沙運輸船的效率 一是可以從抽沙泵入手，提高單位時間內的產量，比如50方抽沙船采用10寸抽沙泵可比6寸抽沙泵可提高30分鐘左右，掛槳機更換為大動力的則速度更快。所以平常在購買抽沙運輸船的時候，一是看產品的質量，二是產品配置，配置不同價格可能相差不少，但在實際生產過程中，其效率往往要高很多。
Crown-drilling pumping sand:
Type pumping sand is mainly used for drilling large waters or vehicle, dredging vessels can not enter the battlefield or reservoirs, rivers and lakes used, which works with the drill bit through the mud layer, using high-pressure water pumps generate pressure, impact of sediment by water cannons the impact of sediment deposited to form a floating state. The sediment is then pumped by pumping sand and then piped to the destination. Ship design novel, easy operation, high efficiency, suitable for river dredging, lake and reservoir dredging, land reclamation, port cleaning, pumping sand, sand and other construction. Pumping sand is generally divided into 10-80 square, pumping sand pump can be used 6-inch -12 inch propeller plane hanging from 18 hp to 80 hp. Want to improve the efficiency of pumping sand transport ship from one pump to start pumping sand to improve the yield per unit of time, such as 50 10-inch square pumping sand pumping sand pump than 6 inches of pumping sand pump can be increased by 30 minutes, oar machine Replace the power of the big faster. So usually buy pumping sand transport ship in time, one look at the quality of the product, and second, product configuration, configuring different prices may vary a lot, but in the actual production process, its efficiency is often much higher.
|
.jpg)
